NAUE M3

NAUE CLAMP

The NAUE CLAMP Secugrid® geogrid system combines high-strength reinforcement with additional erosion protection for embankments, earth structures and steep slopes at inclinations up to 50°. NAUE CLAMP includes the vertical installation Secugrid® primary reinforcement geogrid and e.g Secumat® 5/5 Q1 ES 601 erosion control mats, secured with U-shaped clamp fasteners. This arrangement is filled with vegetation-supporting topsoil and may be used in conjunction with fast-establishing hydraulic growth mediums, such as hydroseed.

NAUE WRAP

The NAUE WRAP Secugrid® geogrid system for reinforced earth structures utilizes Secugrid® in wrapped, reinforcement envelopes at slope fronts. Temporary formworks, such as wood piles, are used in the site preparation and construction process. Mechanical protection of the high load-bearing capacity of NAUE’s Secugrid® reinforcement technology is secured by the installation of Secumat® erosion control mats or Secutex® nonwoven geotextiles. These measures protect against erosion of the soil.

NAUE STEEL T

NAUE STEEL T utilizes the primary reinforcement of Secugrid® geogrids combined with temporary effective steel-skin facings in enveloped forms to create a reinforced earth construction system that can adapt to numerous slope angles and shapes while supporting vegetation. Plantings are possible on the face of NAUE STEEL T on slopes up to 70°. For steeper slopes, special vegetation measures and irrigation systems are generally necessary. Secutex® nonwoven geotextiles or Secumat® erosion control mats provide slope face erosion control.

NAUE STEEL P

The NAUE STEEL P system combines Secugrid® geogrid reinforcement with longterm (permanent) steel-skin facings to create reinforced earth structures amenable to numerous slope shapes. Vegetation is allowed on slopes up to 70°. For steeper slopes on which vegetation is desired, special plantings and irrigation are necessary.

NAUE GABION

NAUE GABION

The NAUE GABION system utilises Secugrid® geogrids to create reinforced earth structures with gabion fronts. Secugrid® geogrids are installed between the gabion layers and anchored in the soil. The system is highly flexible for design and installation, adjusting to project-specific soil requirements and geometric shapes. This flexibility maximises project economics and aesthetic options.

NAUE BLOCK

NAUE BLOCK

When embankments are planned with angles exceeding 70°, a vegetated face is usually not possible or requires significant and potentially cost-prohibitive work. These situations require harder exteriors, which elevates the importance of surface aesthetics to the reinforced structure. NAUE BLOCK is a Secugrid® geogrid system for reinforcing earth structures and walls while incorporating brick, block, precast concrete, natural stone and other facings for design flexibility.

NAUE PANEL

NAUE PANEL

When embankments are planned with angles exceeding 70°, a vegetated face is usually not possible or requires significant and potentially cost-prohibitive work. These situations require harder exteriors and high-strength reinforcement, but aesthetic, economical facings are still possible. The NAUE PANEL Secugrid® geogrid system provides high-strength reinforcement to earth structures and walls and utilizes precast concrete panels for exterior design flexibility. Secugrid® reinforcement geogrids are installed between or connected to the facing elements.

NAUE NAIL

NAUE NAIL

The NAUE NAIL system combines the strength and durability of Secugrid® geogrids with soil nails to create a steep slope reinforcement system at slope inclinations up to 60°. Secugrid®, with its uniform, flat bar construction and outstanding junction strength, provides the primary reinforcement in the slope direction. The dimensioned soil nails are spaced uniformly across the installed Secugrid® reinforcement, which covers the slope surface.

Subscribe to RSS - NAUE M3